Precautions to prevent damage to the vacuum pump

Discuss problems installing or using TrackStudio.

Precautions to prevent damage to the vacuum pump

Postby lay1014 » Tue Feb 18, 2020 10:45 am

Precautions to prevent damage to the vacuum pump

In the case of a small gap, when the temperature rises, the vacuum pump cover will expand, but the pump casing will prevent the cover from expanding. Because of this, a lot of stress is generated in the pump casing, and it even bursts.

In order to prevent the vacuum pump from being damaged due to temperature stress, the following points should be noted:

(1) Insulate the housing of the vacuum pump well;

(2) Heat the vacuum pump slowly and evenly before starting:

(3) Avoid cooling the fog parts containing high temperature parts;

(4) All fittings on the pump casing should be carefully checked based on temperature stress;

(5) The alignment of the shaft and bearing should be checked in a cold state, in a warm-up period, and in a hot state to prevent the shaft from deforming at any temperature.

Piston Vacuum Pump For Industry ... ustry.html

How To Choose The Right Vacuum Pump Oil ... p-oil.html

Oil Free Vacuum Pump In Aromatics Extraction System ... ystem.html
Posts: 6
Joined: Fri Aug 09, 2019 11:59 am

Return to TrackStudio Support

Who is online

Users browsing this forum: No registered users and 8 guests