Inspection methods of hidden safety hazards of water ring va

Discuss problems installing or using TrackStudio.

Inspection methods of hidden safety hazards of water ring va

Postby lay1014 » Fri Aug 09, 2019 12:04 pm

In daily use, it is important for product quality. Water ring vacuum pump must be shut down in a planned way. After that, we should also pay attention to the following circumstances in accordance with the management regulations, when the pump shutdown is required, the person in charge of the pump shutdown unit must pay attention to four hours in advance for the relevant shutdown approval procedures; point of view, when the power department at a higher level, the company or the line maintenance failure needs to shut down.

In addition, when the line in the mine fails, it will be shut down due to maintenance; when the water ring vacuum pump fails or needs to be shut down due to regular switching; when the circulating pool needs to replace the water source; when the welding of nearby drainage pipeline and the replacement and installation of other ancillary devices; for this reason, the vacuum pump needs to be shut down because of other reasons. When special circumstances or reasons require outage.

Afterwards, we must also pay attention to the important achievements of economic and social development in terms of security development, that is, to enable the people to enjoy the economic development and social development safely and happily. It is precisely because of this, in the ordinary use of water ring vacuum pump, our ultimate goal is to pay attention to should be to minimize safety incidents, but also should pay attention to reduce personal and property losses.

Next, the water ring vacuum pump unit is mainly used for rough vacuum. In the process of large air extraction. It is also used to extract air and other non-corrosive gases, which do not dissolve in water and contain a small amount of solid particles, in order to form a vacuum in a sealed container.

The water ring vacuum pump unit overcomes the characteristics of the limit pressure difference of a single water ring pump when it is used, and at the same time, it also serves the shortcomings of low pumping rate at a certain pressure. At the same time, it can keep the water ring vacuum pump unit working rapidly, which means that it has the advantage of relatively large pumping rate; when equipped with explosion-proof, it has the advantage of high pumping rate. When motor and electrical appliances are in compliance with the corresponding safety rules, the water ring vacuum pump unit can also extract flammable and explosive gases.
Liquid Ring Vacuum Pump
Rotary Vane Vacuum Pump
Dry screw vacuum pump
lay1014
 
Posts: 3
Joined: Fri Aug 09, 2019 11:59 am

Return to TrackStudio Support

Who is online

Users browsing this forum: No registered users and 5 guests

cron